Installed CAM software on one of machine.
Given IP address to both Ethernet port of Storage using serial port(Document bundled with server is referred).
registered one of ip in CAM software .It has automatically detected 2nd IP address.
First created Virtual Disk .
Then Created Volumes.
Let the volume get initialized for some time.
Created Hosts name as per Servers that needs to be connected to storage.
Created Host Groups and added these servers into it.
Clicked on mapping and mapped volumes to default storage.
Attached Volume to this host group.
Setup Initiator according to HBA port of servers.
I’m a new reader and have been very impressed with your recent post and thought to drop a friendly note. It is really great information related to used sun storage. Waiting for more posts, is there a way to subscribe to your blog via email?
ReplyDeleteI m overwhelmed by your reply Here ..However its been 1 year i m not in touch with sun servers :( . (Life moves on ). I have been busy in some other works so couldn't find time to watch these replies here.
DeleteI inherited a pile of parts from an office we closed down. In the pile is a 6180, and an expansion shelf... but no documentation or software.
ReplyDeleteI got the 6180 on the network with DHCP, but I don't know what I need to do to do a password recovery. Can that be done with CAM? Or will I need a serial cable to access the CLI?
Where do I get a copy of CAM? Do you know the pin-out for the serial cable (if I even need it)?
Thanks for your helpful post, it's brief steps were more educational than trying to read the online documentation from Oracle.
I m overwhelmed by your reply Here ..However its been 1 year i m not in touch with sun servers :( . (Life moves on ). I have been busy in some other works so couldn't find time to watch these replies here.
Delete